New Fliegl Tandem-Plattform-Anhänger TPS 180 tarpaulin trailer
















If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.




















Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Chassis: Center axle trailer
Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened!
Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
Fixed roof with tarpaulin and bows, tarpaulin color: white
Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels)
Achsenkonfiguration: 2 axles
Customized transport solution
Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs
Fine-grained steel welded construction
"Vario-Lash" lashing rings for use in the "Load-Lock profile"
2.5 tons each
loose
Gear-supported front legs
with a straight lower part and single-sided operation on the right
Telescopic rear support
Retractable ladder at the rear
Door latch on the side
Chocks with holder
Aluminum side impact protection
Steel underrun protection
Quarter panel fenders in front of and behind each axle
Rear impact protection
Plastic toolbox with drawer and insert
w=650 / h=520 / d=670 mm
lockable with a padlock
Coupling device for center axle trailer
according to customer requirements
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
"Axle/chassis laser-aligned" to reduce tire wear and fuel consumption
Braking system
2-line compressed air braking system
color-coded lines for easy maintenance
Spring-loaded parking brake
Duomatic connection at the front
with connection line to the towing vehicle
electronic braking system with EBS plug at the front
with connection cable
with raise and lower valve
Vehicle – driving stability system
Wheels and tires
385/65 R22.5"
manufacturer's choice
Steel rims
factory silver
Electrical system
24 Volt
multi-chamber lights
yellow LED lighting on the sides
2 white position lights at the front
2 white/red side marker lights at the rear
1 x 15-pole plug at the front
with connection cable
Floor
Sieve-printed panels
approx. 30 mm thick
for high point load capacity
Platform length approx. 6,900 mm
Front bulkhead / corner posts at the front
2,580 mm high
steel corner posts in a full-volume design
release mechanism for side tarpaulin on the front bulkhead
Center posts
Sliding posts
can be moved along the entire length
with 4-fold insertion pockets and a long pocket at the bottom
Insertion slats
Rows of aluminum V-insertion slats
Rear bulkhead / corner posts at the rear
Rear corner posts
steel up to the lower edge of the roof
attachment for tarpaulin with round tube and tarpaulin tensioner
Nwebyrjzcqh Ne T Nayjk
Rear portal doors
2-wing
each with 2 internal rotating bar locks
Tarpaulin
Tarpaulin with welded horizontal and vertical straps
Tensioners made of stainless steel
Customer lettering on side tarpaulins and rear portal possible
Roof
Optimal rain gutter at the rear
at the top of the end bow
above the doors
Registration country / signs
Germany
with Dekra inspection and certificate (according to §13 EG - FGV)
Load securing certificate according to EN 12642 XL
24/7 service hotline
prepared for license plate holder
single row
Reflective strips: red
around the rear portal
*also available as a drive-through version
Customized transport solution